новые иконки в OpenBoard
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
OpenBoard/thirdparty/xpdf/xpdf-3.02/doc/pdftops.hlp

240 lines
9.0 KiB

! Generated automatically by mantohlp
1 pdftops
pdftops - Portable Document Format (PDF) to PostScript
converter
pdftops [options] [PDF-file [PS-file]]
Pdftops converts Portable Document Format (PDF) files to
PostScript so they can be printed.
Pdftops reads the PDF file, PDF-file, and writes a
PostScript file, PS-file. If PS-file is not specified,
pdftops converts file.pdf to file.ps (or file.eps with the
-eps option). If PS-file is '-', the PostScript is sent
to stdout.
()
2 ONFIGURATION_FIL
Pdftops reads a configuration file at startup. It first
tries to find the user's private config file, ~/.xpdfrc.
If that doesn't exist, it looks for a system-wide config
file, typically /usr/local/etc/xpdfrc (but this location
can be changed when pdftops is built). See the xpdfrc(5)
man page for details.
()
2 OPTIONS
Many of the following options can be set with configura-
tion file commands. These are listed in square brackets
with the description of the corresponding command line
option.
-f number
Specifies the first page to print.
-l number
Specifies the last page to print.
-level1
Generate Level 1 PostScript. The resulting
PostScript files will be significantly larger (if
they contain images), but will print on Level 1
printers. This also converts all images to black
and white. No more than one of the PostScript
level options (-level1, -level1sep, -level2,
-level2sep, -level3, -level3Sep) may be given.
[config file: psLevel]
-level1sep
Generate Level 1 separable PostScript. All colors
are converted to CMYK. Images are written with
separate stream data for the four components.
[config file: psLevel]
-level2
Generate Level 2 PostScript. Level 2 supports
color images and image compression. This is the
default setting. [config file: psLevel]
-level2sep
Generate Level 2 separable PostScript. All colors
are converted to CMYK. The PostScript separation
convention operators are used to handle custom
(spot) colors. [config file: psLevel]
-level3
Generate Level 3 PostScript. This enables all
Level 2 features plus CID font embedding and masked
image generation. [config file: psLevel]
-level3Sep
Generate Level 3 separable PostScript. The separa-
tion handling is the same as for -level2Sep. [con-
fig file: psLevel]
-eps Generate an Encapsulated PostScript (EPS) file. An
EPS file contains a single image, so if you use
this option with a multi-page PDF file, you must
use -f and -l to specify a single page. No more
than one of the mode options (-eps, -form) may be
given.
-form Generate a PostScript form which can be imported by
software that understands forms. A form contains a
single page, so if you use this option with a
multi-page PDF file, you must use -f and -l to
specify a single page. The -level1 option cannot
be used with -form.
-opi Generate OPI comments for all images and forms
which have OPI information. (This option is only
available if pdftops was compiled with OPI sup-
port.) [config file: psOPI]
-noembt1
By default, any Type 1 fonts which are embedded in
the PDF file are copied into the PostScript file.
This option causes pdftops to substitute base fonts
instead. Embedded fonts make PostScript files
larger, but may be necessary for readable output.
[config file: psEmbedType1Fonts]
-noembtt
By default, any TrueType fonts which are embedded
in the PDF file are copied into the PostScript
file. This option causes pdftops to substitute
base fonts instead. Embedded fonts make PostScript
files larger, but may be necessary for readable
output. Also, some PostScript interpreters do not
have TrueType rasterizers. [config file: psEm-
bedTrueTypeFonts]
-noembcidps
By default, any CID PostScript fonts which are
embedded in the PDF file are copied into the
PostScript file. This option disables that embed-
ding. No attempt is made to substitute for non-
embedded CID PostScript fonts. [config file: psEm-
bedCIDPostScriptFonts]
-noembcidtt
By default, any CID TrueType fonts which are embed-
ded in the PDF file are copied into the PostScript
file. This option disables that embedding. No
attempt is made to substitute for non-embedded CID
TrueType fonts. [config file: psEmbedCIDTrueType-
Fonts]
-preload
Convert PDF forms to PS procedures, and preload
image data. This uses more memory in the
PostScript interpreter, but generates significantly
smaller PS files in situations where, e.g., the
same image is drawn on every page of a long docu-
ment.
-paper size
Set the paper size to one of "letter", "legal",
"A4", or "A3". This can also be set to "match",
which will set the paper size to match the size
specified in the PDF file. [config file: psPaper-
Size]
-paperw size
Set the paper width, in points. [config file:
psPaperSize]
-paperh size
Set the paper height, in points. [config file:
psPaperSize]
-nocrop
By default, output is cropped to the CropBox speci-
fied in the PDF file. This option disables
cropping. [config file: psCrop]
-expand
Expand PDF pages smaller than the paper to fill the
paper. By default, these pages are not scaled.
[config file: psExpandSmaller]
-noshrink
Don't scale PDF pages which are larger than the
paper. By default, pages larger than the paper are
shrunk to fit. [config file: psShrinkLarger]
-nocenter
By default, PDF pages smaller than the paper (after
any scaling) are centered on the paper. This
option causes them to be aligned to the lower-left
corner of the paper instead. [config file: psCen-
ter]
-pagecrop
Treat the CropBox as the PDF page size. By
default, the MediaBox is used as the page size.
-duplex
Set the Duplex pagedevice entry in the PostScript
file. This tells duplex-capable printers to enable
duplexing. [config file: psDuplex]
-opw password
Specify the owner password for the PDF file. Pro-
viding this will bypass all security restrictions.
-upw password
Specify the user password for the PDF file.
-q Don't print any messages or errors. [config file:
errQuiet]
-cfg config-file
Read config-file in place of ~/.xpdfrc or the sys-
tem-wide config file.
-v Print copyright and version information.
-h Print usage information. (-help and --help are
equivalent.)
()
2 XIT_CODE
The Xpdf tools use the following exit codes:
0 No error.
1 Error opening a PDF file.
2 Error opening an output file.
3 Error related to PDF permissions.
99 Other error.
()
2 AUTHOR
The pdftops software and documentation are copyright
1996-2007 Glyph & Cog, LLC.
()
2 SEE_ALSO
xpdf(1), pdftotext(1), pdfinfo(1), pdffonts(1),
pdftoppm(1), pdfimages(1), xpdfrc(5)
http://www.foolabs.com/xpdf/
()